Category Archives: Bee Installation

Bee Vitamins

In addition to feeding your bees a regular dose of sugar water, you’ll also want to supplement that with “bee vitamins” that’ll basically help them to stay healthy and get stronger.

We used a product called “Super DFM” which sounds more like an early 90’s rap group, but I digress.

Honeybee Vitamins -

I know what you’re thinking “but how do we make thousands of bees take a multi-vitamin?”. Good question. Having kids of our own I immediately thought of a tiny little oral syringe being used to force feed it to a massive line of waiting bees. Thankfully it was much easier than that.

The trick is to simply entice them to eat it themselves. And the best way to do that?

Honeybee Vitamins -


The idea is that you add the vitamins to some sugar and then leave it somewhere that the bees will be able to get at it. The bees will eat the sugar and in the process get their vitamins as well.

Honeybee Vitamins -

Honeybee Vitamins -

… + vitamins…

Honeybee Vitamins -

… = something that sort of a powdery fried egg.

Once you have the mixture together, the easiest way to get the bees to eat it is to sift the combination on top of the frames. We used a simple household sifter.

Honeybee Vitamins -

Honeybee Vitamins -

You’ll noticed that the mixture gets on some of the bees. While it’s recommended that you try to avoid that, the bees seemed to be ok. Not only did it encourage them to clean themselves off, it also had the added affect of sending what looked like white “ghost bees” flying around the hive.

It’s been a few weeks since we gave them their vitamins, and the tops of their frames are completely clean and the hives are doing well. Overall it was a pretty easy process.

Feeding Honey Bees

One thing that many people don’t realize is that you need to spend the first few months of each season feeding honey bees to help them get established. Early in the spring there may not be enough nectar and pollen to keep the entire colony going.

So how do you feed honey bees? With sugar water!

Feeding Honey Bees -

The three things that we use to feed out bees:

  • Sugar
  • Water
  • and a Pail Feeder

That’s it.

You should be able to get a basic pail feeder wherever bee equipment is sold.

Step 1

You want to feed the bees a mixture that is half water and half sugar. So start by filling your pail feeder half way with water.

Step 2

Add sugar.

Feeding Honey Bees -
Looks like sand on a foreign planet.

Feeding Honey Bees -

Step 3

Stir stir stir, mix mix mix.

Feeding Honey Bees -

You’ll notice that the syrup will start to thicken, which is good.

Feeding Honey Bees -

Step 4

Stop, hammer time.

Next you want to add the lid to the pail. The key is that it has to be REALLY tight, otherwise you run the risk of having your sugar water all spill out when you flip the pail upside down. For this, we simply take a hammer and tap the lid shut so that it creates a nice, tight seal.

Feeding Honey Bees -

Step 5

Add the feeder to your hive. It’s best to flip the pail upside down AWAY from the hive, since some of the sugar water will spill out at first and you don’t want to soak the hive. After a second or two all of the sugar water will move to the top of the pail causing a vacuum that won’t allow any more air to get in and therefore no more sugar water to pour out.

And that’s it. The bees can smell the sugar water and know exactly what to do with it.

You need to keep an eye on the pail feeder since the bees can go through the sugar water more quickly than you’d think (a friend of ours had his bees empty the pail feeder within 3 days). So far we’ve been checking on our hives once a week and have been able to refill the feeder before it’s been completely emptied.

Installing a Honey Bee Nuc

You may have noticed in some of our previous posts that we have 2 sets of hives in our yard, but we’ve only been showing pictures of bees in one of them. That’s because up until now, only one has been occupied.

But no longer…

Honey Bee Nuc -

Enter the Nuc!

What is a nuc? Good question. When ordering bees, there are primarily two different ways of transferring them: one is a “package” (which can you learn more about in our post from earlier this year), the other is a “nucleus” or “nuc” for short.

With a package, you basically get bees, and that’s it. With a nuc, you’re getting not just bees, bust also frames that the bees have already begun to establish. The idea is that since the bees already have been storing honey and laying eggs, they’ll have a better chance of survival.

We honestly wanted to try installing both a package and a nuc just to see which process we liked more. What’s the verdict? Keep reading to find out 🙂

Honey Bee Nuc -
We had a few bees that found there way out of the box. Not nearly as many as were hanging around our package when we brought it home though.

As you can see, the nuc is basically a cardboard box with some frames inside. Once you crack open the box, you can see that the bees have been busy…

One of the downsides of installing the nuc was that the bees are already so well established. So that means there’s tons of burr comb that’s on the inside of the box and holding some of the frames together that we needed to remove and pull apart. It’s a shame to be wasting their efforts like that…
Burr Comb -

The other downside is that we were installing the bees at night. The idea is that the bees may be calmer and easier to move. While this is true in theory, it also makes it more difficult to see exactly what they’ve been doing.

Honey Bee Nuc -

Most of the time when taking pictures my flash came on automatically, which unfortunately doesn’t give you the best pics. But we were able to capture some of the bees “eating” out of some of the burr comb on the inside of the box.

Check out their “tongues” going in and out of that comb! Pretty cool stuff.

Honey Bee Nuc -

Honey Bee Nuc -

Once we moved all of the frames into our boxes, we setup a feeder just like we did with our other hive, and closed it up for the night. There were still a TON of stray bees that were on the inside lid of the box and inside the box itself, so we left it sit overnight so the bees could find their way in to their new home.

So now that we’ve installed both a package and a nuc, which one did we think was easier?


Honestly, the package was easier. I know, we were surprised too. The original thought was “oh yea, just take some frames from here, move them over there, no problem.” and while it wasn’t difficult, it definitely felt more involved and seemed more stressful for the bees than the package was. Considering the packages cost less than nucs as well, we’ll likely be ordering them in the future should we need more bees.

What do you think? Packages or Nucs?

Installing Bees

The day has finally arrived. After months of preparation, it’s bee day!

We drove out to Bedillion Farm to pickup our first ever package of bees.

Package of Bees -

Thankfully, family was available to watch the kids, because there were some stragglers that hung around outside the package and were flying around the backseat on the way home.

Package of Bees -

Even after we removed the package from the car, the little guys stayed with the rest of the hive.

Want to know what a package of bees sounds like? Play the video below…

That’s a lot of wings flapping. The buzzing can be a bit intense when you first hear it, but after a while it’s almost calming.

Time to crack that thing open…

Opening a Bee Package - My3Bees

Once you remove the lid you’ll find a metal can that contains a sugar water mixture inside. The bees use this to sustain themselves while in the package. First step it to remove it.

After the can is removed, you can pull out the queen bee herself…

Queen Bee -

See that box? Yep, she’s in there. Not just her, but some attendant bees as well.

Sidebar: What?! Not only were the great people at Bedillion able to capture the queen, but they were also able to locate the “attendant bees” and get them in there as well? Seriously?! We’ve got a lot to learn.

This is also a good time for the disclaimer: This is our first time with honeybees, so please don’t take what we did as gospel. While we’ve taken classes, read books, and watched other people do it, that doesn’t mean that what we’re doing is 100% correct. We’re simply doing what we’ve been told and are hoping for the best.

Once we removed the cork from the queens cage and positioned it between some frames, it was time for the REAL fun to begin.

Susan quickly gave the bees a gentle spray of sugar water. This keeps them from flying around too much and makes them focus on cleaning themselves rather than attacking the beekeeper (or the camera man).

After that, just pour them on in…

That might be one of the craziest things I’ve ever seen in my 32 years on this earth.

Bees -

Pile of Bees -

Now it’s time to feed them. Since it’s still early spring, there aren’t many flowers that have blossomed enough to provide nectar and pollen for the bees to survive. Therefore, we need to feed them for a while using a sugar-water mixture in a pail. You just flip the pail upside down and the bees come and drink droplets off of the bottom.

Syrup Install 1

Syrup Install 2 -

After that, all that’s left was to put an empty super around the pail, put the lid on the hive, and call it a day.

Final Hive -

After less than an hour, all of the bees that were flying around the hive had found there way in and were settling into their new home.

The entire process was surprisingly far more simple and less stressful than we originally thought (it was most likely more stressful for the bees than it was for us).

We’ll keep an eye on them for the next few days. Apparently they can go through the sugar water REALLY quickly, so we’ll need to keep that stocked.

Lots more coming. We’re in the process of building a shed that we can use to house the bee equipment, so we’ll likely share that process as well. And in a few months we’re supposed to get our SECOND hive, which will be a nucleus rather than a package. Not sure what the difference is? Hang around to find out!